2016 eXmark LZS801GKA604A1

$11,699.00 - Stock Number:

Jefferson Hills, PA

For decades, Exmark's Lazer Z® has been the standard of excellence for commercial-grade, zero-turn mowers. Today, it is coveted by landscape pros and homeowners alike for its unmatched cut quality, productivity, durability and performance. And, just when you thought the best couldn’t get any better—our newest Lazer Z’s have 40% fewer parts, making them more productive and easier to maintain, too. That’s a win-win for everyone.


Drive Hydro-Drive.
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Speed 3,750 rpm
Type Kawasaki® FX801V V-Twin
Caster Angle 0.5"-thick caster yoke arms
Drive Tires 24"x12-12", 4-ply Turf Master.
Frame Unibody, welded, heavy duty 1.5"x3" tubular steel.
Front Caster 13"x6.5-6", smooth-tread, semi-pneumatic.
Steering Hydraulically dampened twin levers, adjustable both fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Blade 3 Blades at 20.50" [0.20"-thick (5.1 mm) alloy steel]
Blade Spindle No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30 mm (1.18") diameter spindle shaft and splined blade driver
Blade Tip Speed Approximately 18,500 fpm.
Cutting Deck 60" UltraCut™ Series 4 (152.4 cm)
Height 70.0 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Speed Up to 10.0 mph (16 kmph) forward, and up to 6.0 mph (9.7 kmph) reverse.
Weight 1197 lbs.
Width 72.8 in. (184.9 cm)
General Information
Air Filter Heavy duty canister air filtration system.
Cutting Height 1.0" (2.5 cm) to 5.5" (13.97 cm) in 0.25" (0.64 cm) increments.
Deck Full-floating, side-discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive System Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy duty components. 12cc pumps and 14.5 cubic inch motors
Electrical 12-V battery with 15-amp alternator
Parking Brake Lever-actuated disc brake.
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Systems Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Standard Engine Hour Meter
Power Take-Off (PTO)
Engagement MagStop Electromagnetic 200 ft-lb clutch.



  • Built To Last - There’s tough. And, there’s Exmark tough. That’s what you get with this 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. With welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
  • Doing More With Propane - The EFI system optimizes fuel delivery in real-time, improving efficiency and performance considerably. When you combine this with the lower cost of propane, operating expenses should be significantly lower than typical gas-powered mowers.
  • Less Time At The Pump - Gas-powered S-Series models have a single 12-gallon tank with one fill location.

Product Media

2016 eXmark LZS801GKA604A1