2017 eXmark VTS730EKC52400

- Stock Number:

Jefferson Hills, PA

For professionals who want stand-on maneuverability and traction. And Exmark quality.

Not surprisingly, the difference between our stand-on mowers and the competition’s starts with the operator platform. Vantage Series mowers feature a large, rubber padded platform with weight-compensating suspension that allows the operator to easily and comfortably shift his weight on hills for maximum control and maneuverability. Our patented thigh pads also comfortably conform to the operator’s legs without interfering when the platform is folded up for storage, trailering or converting the Vantage to a walk-behind.


Air Filter Standard Engine Manufacturer's air filter
Displacement 747 cc
Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location.
Fuel Type Gas EFI
Model Kohler® ECV730 Command™ EFI Electronic Fuel Injected
Speed 3,600 rpm
Caster Angle .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Drive Tires 20 x 10.50-8 Kenda Tires
Frame Welded, heavy-duty 1.5" x 3" tubular steel.
Front Caster 11 x 4.0-5, smooth-tread, semipneumatic tires.
Steering Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
Blade Spindle No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
Blade Tip Speed Approximately 18,500 fpm.
Curb Weight 866 lbs
Height 50 in. (127 cm)
Length 74 in. (188 cm)
Width 64.8 in. (164.6 cm)
General Information
Blades 3 Blades at 18" Length
Cutting Deck 52"
Cutting Height 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
Deck Floating Deck; Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Lift Standard; mechanical lift-assist springs.
Drive Type Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors.
Drive Wheels Allows unit movement without engine running.
Electrical 12-volt battery with 15-amp alternator.
Parking Brake Lever-actuated bar brake.
Safety Systems Operator Presence Controls (OPC) with safety interlock system indicators
Speed Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse
Standard Fuel Indicator - Float Gauge
Power Take-Off (PTO)
Engagement Warner 200 ft-lb clutch



  • Adjustable Front Reference Bar - Ergonomically designed steering system includes an adjustable front reference bar that can control the top end speed of the machine.
  • Hydro-Drive - Smoother operation and consistent control is made possible with our new 12 cc pump and 230 cc wheel motor.
  • Now with Propane - The Vantage S-Series is now available with propane technology and a 52” UltraCut Series 4 full-floating deck.
  • Operator Platform - A rubber platform with self-compensating suspension provides a comfortable ride for any size rider. Patented, integrated thigh pads also pivot away, allowing easy access for maintenance. Folds up for reduced trailering space.
  • Patented Mechanical Control System - With its solid rods, there are no cables to stretch, and no annoying loss of ground speed.
  • Zero-Maintenance Spindles - Made from rugged, cast aluminum with sealed bearings, our spindles are designed to withstand the effects of moisture and impacts, with no annual greasing required.

Product Media

2017 eXmark VTS730EKC52400