2017 eXmark LZX940EKC606T0

- Stock Number:

Jefferson Hills, PA

What you get when you check all the boxes.

And with our top-of-the-line Lazer Z X-Series, there are plenty of boxes to check. For starters, you can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60- and 72-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Specifications

Transmission
Drive Hydro-Drive.
Engine
Displacement 999
Fuel Gas EFI, Fuel Indicator - electronic Sender
Fuel Capacity 12-gallon (45.4-L), single fuel tank with single fill location.
Speed 3,650 rpm
Standard Carb Compliant
Type Kohler® ECV940 Command™ EFI
Chassis
Caster Angle .50" thick caster yoke arms.
Drive Tires 24 x 12.0-12, 4-ply Turf Master®
Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Front Caster 13 x 6.5-6 smooth tread, semi-pneumatic tires.
Steering Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Dimensions
Blade 3 Blades at 20.50" Length
Blade Spindle No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm(1.18")diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Deck 60"
Height 70 in. (177.8 cm)
Length 83.1 in. (211.1 cm)
Speed Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
Weight 1264 lbs
Width 72.8 in. (184.9 cm)
General Information
Air Filter Heavy-duty canister air filtration system
Cupholder Standard
Cutting Height 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Floating Deck, Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Drive System Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Electrical 12-volt battery with 25-amp alternator.
Parking Brake Lever-actuated disc brake.
ROPS 2-post foldable ROPS standard with seat belt and latch.
Safety Systems Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Power Take-Off (PTO)
Engagement MagStop Electromagnetic 250-ft-lbs clutch with spot brake

Features

All

  • A New Level of Comfort
  • Patented RED Technology
  • Productivity
  • Rear Discharge Deck
  • Tool-less Belt Removal
  • UltraCut Series 6 Deck

Product Media

2017 eXmark LZX940EKC606T0